Did you know that the squeaking you hear from your pipes is the hot water causing the pipe to expand? This and more great plumbing information is provided in this article. If you are looking for clear and concise information, then read the tips we have provided below.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.
If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.
To help you find a good plumber, you should get recommendations from people whom you trust. Asking a friend or a neighbor is usually more trustworthy than picking a random plumber out of the phone book. You need a competent plumber, otherwise you could be in for a much bigger problem down the road.
If your toilet is slow to flush, add some white vinegar to the overflow tube. White vinegar helps the water from your tank to flow quickly, which will make the toilet flush faster. It is recommended that you use about a quart of the vinegar and let it stay there for at least an hour before flushing.
Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.
In conclusion, you now know what causes the squeaking noise from your pipes, as well as a lot more information. Use this guide as the best way to take care of any plumbing issues that might come up. Hopefully, you were able to comprehend the advice given and will be able to fully utilize it whenever needed.